Using Apple Hardware Test on computers with OS X 10.7 or later

January 2001 – Apple Hardware Test for Power Mac G4 Cube version 1.1 – Download G4 Cube, will not work with any other computer. January 2002 – Apple Service Diagnostic 062602 1.0 XServe – Download XServe July 2002 – Apple Hardware Test for iMac version 1.2.2 – Download Apple iMac, Apple eMac. October 2002 –. Just to answer the question of how to get AHT and assuming your Mac is indeed a 13inch mid-2010 MacBook Pro your model is MacBookPro7,1 and for that model you can download AHT from Apple with the link below and follow my steps below to put it on a flash drive.

Apple Hardware Test Macbook Pro Mid 2009 Download

In this video, I show you how to run the Apple Hardware Test. This test is for Macs older than June of 2013. IMPORTANT: If your Mac was released after June 2. My question is very simple. I have some trouble on my MBP13 mid-2010 (MC375LL/A) and I want to diagnose it using the Apple Hardware Test. I try to hold the D key down during restart of the MBP but. Same problem with 'MacBook Pro (15-inch, Mid 2010)'; now. Is MacBookPro7,1 and for that model you can download AHT from Apple with the link. I would like to test hardware on a mac book pro model from 2009 with Mac Os X 10.9.2 installed. Since it is running unreliably I would like to perform a diagnosis/hardware test. What is easy to find on the internet is, that on pre 2013 models, the apple hardware test was to be run, on models after that, the apple.

Mac NoteBook and Desktop computers shipping with OS X 10.7 or later have a partition on the hard drive or flash storage that contains AHT. To start AHT on these computers please follow these instructions:

1. Press the power button to turn on your computer.
2. Press and hold the D key before the gray startup screen appears.
3. It takes a minute or so for AHT to start up and inspect your hardware configuration. While this is taking place, an icon appears on the screen:
   
4. When the process is complete, select your language and click the right arrow. If you aren't using a mouse, you can use the up and down arrows to select a language and then press the Return key.
5. The AHT console appears. You can choose which sort of test or tests to perform:
   • To perform all of the basic tests, click the Test button or press the 'T' key or the Return key.
   • To perform a more thorough diagnostic test, select the 'Perform extended testing' checkbox under the Test button before you click the Test button.
Note: Your test results will appear in the window in the bottom-right of the console.
6. To exit AHT, click Restart or Shut Down at the bottom of the window.

Some Macintosh computers that shipped with OS X Lion and later support the use of Apple Hardware Test over the Internet. These computers will start up to an Internet-based version of AHT if the hard drive does not contain AHT. An Internet-enabled connection via Ethernet or Wi-Fi is required to use this feature. Internet-based AHT functions the same as AHT on the hard drive or flash storage outlined above.

The Mac NoteBook and Desktop computers listed in Computers that can be upgraded to use OS X Internet Recovery will require a firmware in order to support the Internet version of AHT. Without this update you may see the behavior discussed inthis article.

Aug 9, 2013 4:28 PM

Most Mac users enjoy several years of trouble-free experience, but eventually, time will come when hardware problems arise. Although it rarely happens, problems can be caused by a motherboard issue, a failing hard drive, a GPU problem, or lack of memory space. Fortunately, Apple has a way to detect, prevent, and solve any hardware-related issue. Apple Hardware Test is the first step. You can use it to check if there are serious hardware issues to deal with. Don’t worry, because you can run the test yourself. We will teach you how below.

Apple Hardware Test Macbook Pro 2010 Download

What Mac Models Can Run Apple’s Internet-Based Hardware Test?

Not all Mac models can run the Internet-based Apple hardware test. Some MacBook models need to use a local version of the hardware test, which has to be installed on the hard drive or saved on OS X DVD. Other Macs manufactured after 2013 can use the latest version of the Apple hardware test, which is called the Apple Diagnostics test. Here’s a guide on how to use Apple Diagnostics test. As for the only Mac models that can use the web-based version of the Apple hardware test are as follows:

Update Macbook Pro Hardware

• 11-inch MacBook Air 3 (late 2010 through 2012)
• 13-inch MacBook Air 3 (late 2010 through 2012)
• 13-inch MacBook Pro 8 (early 2011 through 2012)
• 15-inch MacBook Pro 6 (mid-2010 through 2012)
• 17-inch MacBook Pro 6 (mid-2010 through 2012)
• MacBook 7 (mid-2010)
• Mac Mini 4 (mid-2010 through 2012)
• 21.5-inch iMac 11 (mid-2010 through 2012)
• 27-inch iMac 11 (mid-2010 through 2012)

It is important to note that the mid-2010 through early 2011 Mac models may require to update the EFI firmware before you can run the web-based Apple Hardware Test. If you are uncertain if you need to update the EFI firmware or not, you can do the following:

Macbook Pro Hardware Upgrades

• Go to Apple menu and click About This Mac.
• A new window will open. Click the More Info button.
• If your Mac is running in OS X Lion or the later version, select System Report. Otherwise, proceed to step 4.
• Another window will open. Highlight Hardware in the left portion of the screen.
• On the opposite corner of the screen, take note of the boot ROM version number of your Mac and the SMC version number.
• Once you have these details, go to the EFI and SMC Firmware Update page on Apple’s website. Compare the versions you have with the latest available. If your Mac is running on an older version, you need to download the most recent version on the same web page.

How to Use the Internet-Based Apple Hardware Test

As soon as you have verified and confirmed that your Mac is capable of running the Internet-based Apple Hardware Test, you can start using it. Here’s how:

• Turn off your Mac first.
• If you are running a MacBook, connect it to an AC power source. Do not run the test with only your MacBook’s battery as the power source.
• Press the Power button while holding down the Option and D keys. Continue until the Starting Internet Recovery message pops up on your display.
• Wait for a few seconds. You will soon be prompted to select a network. Use the drop-down menu to choose from the list of available network connections.
• Select a wireless network and enter the password if asked. Press Return or Enter. You can also click the checkmark button on your display.
• As soon as you are connected to your chosen network, you will see a message on your screen that says, Starting Internet Recovery. This will take a while because the Apple Hardware Test will be downloaded to your Mac. Once it is completed, you will be prompted to select a language.
• To select a language to use, use the Up and Down arrow keys or the mouse cursor.
• The Apple Hardware Test will then continue to check what hardware is installed on your Mac. Again, this will take time.
• Before you proceed with the actual test, it’d be better if you verify first what hardware was found so you can ensure that all your Mac’s components are correct and accounted for. Check if the exact amount of memory is displayed, along with the graphics and CPU specs. If you suspect that something is wrong, verify your Mac’s configuration by going to Apple’s support site. If the displayed config does not match with what your Mac model’s configuration should be, your device might be failing. To verify your Mac’s hardware specs, navigate to the Hardware Profile tab.
• If all configuration details are correct, proceed with the testing by going to the Hardware Test tab.
• Note that the Apple Hardware Test can support two different types of testing; a standard test and an extended test. While the standard test is generally a good option, the extended test is highly recommended, especially if there is an issue with your Mac’s graphics card or RAM.
• To run the standard test, select the Standard Test option and click the Test button. At this point, the hardware test should start. It will take several minutes to complete, so just be patient. Do not worry if you hear your Mac’s fans rev up and down. That’s normal during the hardware testing process.
• Once the test is done, a list of potential issues or a No trouble found message will be displayed in the test results pane. If there is an error, check what it is about. We listed some of the most common error codes below alongside their meanings:
  • 4AIR – AirPort wireless card
  • 4ETH – Ethernet
  • 4HDD – Hard disk (includes SSD)
  • 4IRP – Logic board
  • 4MEM – Memory module (RAM)
  • 4MHD – External disk
  • 4MLB – Logic board controller
  • 4MOT – Fans
  • 4PRC – Processor
  • 4SNS – Failed sensor
  • 4YDC – Video/Graphics card

These error codes generated by the Apple Hardware Test seem to be cryptic, and in some cases, only certified Apple service technicians can understand them. But because most of these codes are recurring, they’ve become known.

• If no problem was found, you could continue running the extended test. It can detect graphics and memory problems better than the standard test. To do the extended test, select the Perform Extended Testing option and click the Test button.
• If by any chance, you’d like to stop the test, just click the Stop Testing button.
• Once you are done using the Apple Hardware Test, end it by clicking the Shut Down or Restart button.

Refurbished Apple Macbook Pro

If no error was found after the test and your Mac is still experiencing problems, then you can check your system. It might be loaded with files you don’t need, or your RAM is taken up by unnecessary programs and apps. To fix the problem, download third-party tools like Tweakbit MacRepair.

Apple Macbook Pro Review